http://www.xceedrc.com/product/Latest products from XceedRC.comPHP - Nettrends VOFhttp://xceedrc.com/images/mainimage1.jpghttp://www.xceedrc.com/product/106229/Hard-ware box big (300 x 200 x 50 mm) Durable plastic box with secure closing system. Flexible devision of internal system, to store many small bits, o-rings, clips and other hardware. Sports a large Xceed logo on the top.SpareThu, 21 Mar 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/108262/Handy tool to set the spring-preload of the axial type clutches for 1/10 and 1/8 onroad. Machined top quality aluminum in green Xceed color and logo engraved. MainThu, 21 Mar 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/201532/The Xceed ZX-21 DS6 EdoMod on-road racing engine comes with a new long stroke design to improve even more low and mid range acceleration. 
The components have been 'hand modified' by Edoardo using his extensive experience . Reliability and performance has been improved while maintaining good fuel efficiency.
 Balanced 14mm 'turbo' silicone-filled crankshaft for improved fuel flow and reduced weight, Super aligned 'knife edged' aerodynamic connecting rod, Hand finished hard chromed brass liner with tear-drop work on the ports, Hand modified rear back plate for improved fuel flow. Lightened CNC machined piston made from high percentage silicone alloy billet, large size finned turbo combustion chamber insert for better heat dissipation, bigger ultra light weight cooling head with Xceed graphics, Swiss quality 14mm main ceramic bearing and a composite slide carburetor with 8.0mm and 9.0mm green anodised alu venturi inserts. OptionalThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/201531/The Xceed ZX-21 DS6 EdoMod on-road racing engine comes with a new long stroke design to improve even more low and mid range acceleration. 
The components have been 'hand modified' by Edoardo using his extensive experience . Reliability and performance has been improved while maintaining good fuel efficiency.
 Balanced 14mm 'turbo' silicone-filled crankshaft for improved fuel flow and reduced weight, Super aligned 'knife edged' aerodynamic connecting rod, Hand finished hard chromed brass liner with tear-drop work on the ports, Hand modified rear back plate for improved fuel flow. Lightened CNC machined piston made from high percentage silicone alloy billet, large size finned turbo combustion chamber insert for better heat dissipation, bigger ultra light weight cooling head with Xceed graphics, Swiss quality 14mm main ceramic bearing and a composite slide carburetor with 8.0mm and 9.0mm green anodised alu venturi inserts. OptionalThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/201037/The Xceed ZX-12 DS6 EdoMod engine is an evolution of the ZX-12 DS5 2012 spec. ABC set and combustion chamber have been redesigned. The components have been “hand modified” by Edoardo using his extensive experience and many.
 Durability and reliability are also of the highest level thanks to our many years of experience in 2 stroke engines,. The Xceed ZX-12 EM delivers great power over the entire rpm range, with very good fuel efficiency, with special attention given to mid range acceleration due to the increased traction from the latest generation of 1/10th touring chassis'. The Xceed ZX-12 DS6 EM is supplied with: a 12mm 'turbo' silicone-filled crankshaft for improved fuel flow and reduced weight, super aligned 'knife edged' aerodynamic connecting rod, hand finished hard chromed brass liner with tear-drop work on the ports, lightened CNC machined piston made from high percentage silicone alloy billet, large size finned turbo combustion chamber insert for better heat dissipation, new ultra light weight cooling head with Xceed graphics , hand modified rear back plate for improved fuel flow, Swiss quality 12mm main bearing and a composite slide carburetor with 5.4mm venturi inserts.OptionalThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/201036/The Xceed ZX-12 DS6 EdoMod engine is an evolution of the ZX-12 DS5 2012 spec. ABC set and combustion chamber have been redesigned. The components have been “hand modified” by Edoardo using his extensive experience and many.
 Durability and reliability are also of the highest level thanks to our many years of experience in 2 stroke engines,. The Xceed ZX-12 EM delivers great power over the entire rpm range, with very good fuel efficiency, with special attention given to mid range acceleration due to the increased traction from the latest generation of 1/10th touring chassis'. The Xceed ZX-12 DS6 EM is supplied with: a 12mm 'turbo' silicone-filled crankshaft for improved fuel flow and reduced weight, super aligned 'knife edged' aerodynamic connecting rod, hand finished hard chromed brass liner with tear-drop work on the ports, lightened CNC machined piston made from high percentage silicone alloy billet, large size finned turbo combustion chamber insert for better heat dissipation, new ultra light weight cooling head with Xceed graphics , hand modified rear back plate for improved fuel flow, Swiss quality 12mm main bearing and a composite slide carburetor with 5.4mm venturi inserts.OptionalThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103271/Table-stand for tyre-glueing holder OFR 1/8 OptionalThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103272/Tyre-glueing holder and stand set OFR 1/8 OptionalThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103060/Nitromax-16 instrument 16% EFRA tool to check the nitro-content of the fuel. Floater system. Only small upper tip may protrude the fuel surface, at 20 degrees Celcius (=F-68) fuel and outside temp. MainThu, 21 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103063/Toe in setup plate universal SpareFri, 08 Feb 2013 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103267/Xceed Vacuum Tyre Soaker comboset with Alum caseMainFri, 14 Dec 2012 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103074/Xceed introduces this superb set-up set for 1/8 scale offroad cars, buggy/ e-buggy, truggy/e-truggy, GT/ Gt-e. The set is made from high quality aluminium parts with clear engraving and green anodising, strong engraved transparent top-plate, quick release nuts and top quality fasteners, spacers and bearings. Fast and easy to measure caster, camber / camber rise, steering throw geometry and front and rear toe. Full color assembly manual included. It all comes in a durable black transport bag, sporting the Xceed logo, to keep this instrument well protected after use ! MainMon, 26 Nov 2012 00:00:00 +0100 GMThttp://www.xceedrc.com/product/103067/Ride height tool for 1/10 TC and 1/10 and 1/12 scale pan cars Strong, light and durable aluminium ride height tool. Laser engraved with height from 2.0 up to 6.0 in 0.2mm steps each. Xceed logo engraved on the side. MainWed, 19 Sep 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/103066/Set-up tools for offroad cars, buggy and truggy. Strong and durable aluminium set-up blocks for offroad use in set of 2. These stand will keep your buggy or truggy well placed while doing set-up work on your car. These are 40mm high and 80mm long, in Xceed X-shape. Green anodized with Xceed engraved logo’s. Lightweight aluminium ride height tool for offroad use. Laser engraved with height from 0 to -20 in 1mm steps each. Xceed logo engraved on the side. Set-up block (2) and ride-height gauge available separate and as set MainMon, 17 Sep 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/103065/Lightweight aluminium ride height tool for offroad use. Laser engraved with height from 0 to -20 in 1mm steps each. Xceed logo engraved on the side.MainMon, 17 Sep 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/103064/Strong and durable aluminium set-up blocks for offroad use in set of 2. These stand will keep your buggy or truggy well placed while doing set-up work on your car. These are 40mm high and 80mm long, in Xceed X-shape. Green anodized with Xceed engraved logo’s.MainMon, 17 Sep 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/103069/Xceed rim trimmer 1/8-1/10 cutter SpareTue, 21 Aug 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/103068/Xceed rim trimmer 1/10 MainTue, 21 Aug 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/103075/Xceed rim trimmer 1/8 SpareTue, 21 Aug 2012 00:00:00 +0200 GMThttp://www.xceedrc.com/product/107250/Cable solder connector 18mm springtype brass ( 4) SpareTue, 21 Aug 2012 00:00:00 +0200 GMT