\
> Search Results
> 1-10 of 406
Hard-ware box big (300 x 200 x 50 mm)
Part Nr.: #106229
Hard-ware box big (300 x 200 x 50 mm) Durable plastic box with secure closing system. Flexible devision of internal system, to store many small bits, o-rings, clips and other hardware. Sports a large Xceed logo on the top.
Nitromax-16 instrument 16%
Part Nr.: #103060
Nitromax-16 instrument 16% EFRA tool to check the nitro-content of the fuel. Floater system. Only small upper tip may protrude the fuel surface, at 20 degrees Celcius (=F-68) fuel and outside temp.
Vacuum Tyre Soaker comboset with Alum case
Part Nr.: #103267
Xceed Vacuum Tyre Soaker comboset with Alum case
Set-up set for 1/8 OFR and GT
Part Nr.: #103074
Xceed introduces this superb set-up set for 1/8 scale offroad cars, buggy/ e-buggy, truggy/e-truggy, GT/ Gt-e. The set is made from high quality aluminium parts with clear engraving and green anodising, strong engraved transparent top-plate, quick release nuts and top quality fasteners, spacers and bearings. Fast and easy to measure caster, camber / camber rise, steering throw geometry and front and rear toe. Full color assembly manual included. It all comes in a durable black transport bag, sporting the Xceed logo, to keep this instrument well protected after use !
Ride height tool 1/10 and 1/12
Part Nr.: #103067
Ride height tool for 1/10 TC and 1/10 and 1/12 scale pan cars Strong, light and durable aluminium ride height tool. Laser engraved with height from 2.0 up to 6.0 in 0.2mm steps each. Xceed logo engraved on the side.
Setup block / ride height tools off-road (3)
Part Nr.: #103066
Set-up tools for offroad cars, buggy and truggy. Strong and durable aluminium set-up blocks for offroad use in set of 2. These stand will keep your buggy or truggy well placed while doing set-up work on your car. These are 40mm high and 80mm long, in Xceed X-shape. Green anodized with Xceed engraved logo’s. Lightweight aluminium ride height tool for offroad use. Laser engraved with height from 0 to -20 in 1mm steps each. Xceed logo engraved on the side. Set-up block (2) and ride-height gauge available separate and as set
Ride height tool off-road
Part Nr.: #103065
Lightweight aluminium ride height tool for offroad use. Laser engraved with height from 0 to -20 in 1mm steps each. Xceed logo engraved on the side.
Setup block off-road (2)
Part Nr.: #103064
Strong and durable aluminium set-up blocks for offroad use in set of 2. These stand will keep your buggy or truggy well placed while doing set-up work on your car. These are 40mm high and 80mm long, in Xceed X-shape. Green anodized with Xceed engraved logo’s.
Cable solder connector 18mm springtype brass ( 4)
Part Nr.: #107250
Cable solder connector 18mm springtype brass ( 4)